Floors
Roofs
Walls
Fixings
PRODUCTS
PC
PC
Panel Closer
The PC is a screw and bracket solution for panel-to-panel connections for timber frame panels. It helps align and secure timber frame panels while reducing fixing quantity, installation time and design complexity.
S250GD/ Z275
Galvanised Mild Steel 2.5mm
Up to 3.93kN
Application Dependant
Securely draws panels together while maintaining vertical and horizontal alignment
Single fixing type: 66% fewer fixings per panel – eliminates dual sourcing and tool changes while speeding up installation by 50%
Six detailed applications vs three for alternative solutions
Achieves 2.5kN/m design strength using 50% fewer parts per 2.4m high panel
29% lower cavity protrusion, rounded edges, and engraved markings help prevent installation errors and protect the membrane
Comes with a novel product estimation tool – simplifies the quotation process
Paslode Structural Timber Screws
Specific Cullen products have been specified to be fixed with Paslode Structural Timber Screws for certain applications.
Position the PC at the panel junction; the dashed line aligns with the edge of the panel covered by the 'CULLEN' logo.
Secure one of the provided PSTS screws into the "first fix" Screw slot closest to the edge of the PC.
Insert a 2nd PSTS screw into the "Second Fix" angled screw hole and drive until the screw is tight (The 2nd screw will diagonally cross the joint, pulling the panels tight and closing any gaps).
Maximum panel gap: 10 mm.
Two Panel Closers are required per 2.4m high wall panel to achieve ≥2.5kN/m design strength
Support you can rely on
Expert technical guidance and customer service, from design to site.