Floors
Roofs
Walls
Fixings
PRODUCTS
TA
TA
Truss Anchor
The TA secures trussed rafters to 2 ply wall plates or head binders whilst providing a positive fixing on two planes.
Z275
Galvanised Mild Steel
Up to 7.54kN
Load Direction Specific
Eliminates damage from skew nailing into the wall plate
“Push on” fit allows truss anchor to be retained in position prior to nailing
Optional triangular nail holes for enhanced performance
Eliminates the need for a pre-cut angle barer to support the valley truss or pre-cut angle to valley truss
Paslode 3.4 x 35mm Electrogalvanised Square Twist Nail
Cullen products have been tested and CE marked to the requirements of ETAG015 using 3.4 x 35mm square twist nails.
Truss to Wallplate
- Standard Installation
- Double wall plate required for all installations (min. 75mm) unless using in a timber frame application where the framing anchor can be fitted to the head binder.
- Enhanced Installation
- Double wall plate required for all installations (min. 75mm) unless using in a timber frame application where the framing anchor can be fitted to the head binder.
- 2 no. Truss Anchors
- Double wall plate required for all installations (min. 75mm) unless using in a timber frame application where the framing anchor can be fitted to the head binder.
Valley Truss
The TA can be used in conditions where the supporting truss is a maximum 45° slope. Fill the 3 nail holes highlighted above to the supporting truss (dependant on TA orientation) and fill 4 no. nail holes (2 no. each face) for the incoming truss for correct installation.
Double wall plate required for all installations (min. 75mm) unless using in a timber frame application where the framing anchor can be fitted to the head binder
The TA can be used in conditions where the supporting truss is a maximum 45° slope. Fill the 3 nail holes highlighted above to the supporting truss (dependant on TA orientation) and fill 4 no. nail holes (2 no. each face) for the incoming truss for correct installation
Support you can rely on
Expert technical guidance and customer service, from design to site.