Floors
Roofs
Walls
Fixings
PRODUCTS
MH Range
MH Range
Multi Hanger Range
The MH hanger range is designed to support timber to timber connections in medium to high load situations.
Z275
Galvanised Mild Steel
Up to 35.12kN
Application Dependant
1 product for floor and roof applications
Range of sizes and potential fixing options allows for greater design flexibility
Efficient nailing patterns to reduce the number of nails and give high performance
Partial fixing options available on request
Paslode 3.4 x 35mm Electrogalvanised Square Twist Nail
Cullen products have been tested and CE marked to the requirements of ETAG015 using 3.4 x 35mm square twist nails.
M12 Bolts
The MH Range Hangers have additional large round holes which can be used to accommodate M12 bolts when specified.
Floor
Solid Header - I-Joist
Solid Header - Open Web
MHE (620) & UZ Clip - I-Joist Header with Backer Block or Solid Header
Roof
Timber to Timber
Guidance
- All hangers in this range do not provide restraint, therefore restraint straps may be required for joist applications
- Floor can be propped with acroprops and fully decked but must not be fully loaded until the masonry above has fully cured
For I-joist the hanger must support 60% of the joist depth, for solid timber and metal web joists the hanger must support 100% of the joist depth to meet NHBC requirments.
Larger holes available for bolt fixings.
Support you can rely on
Expert technical guidance and customer service, from design to site.