Floors
Roofs
Walls
Fixings
PRODUCTS
Connector Plate
CP
Connector Plate
Gang-Nail punched metal plate fasteners are manufactured from galvanised mild steel.
1mm Carbon Steel
Hot dip galvanised
GN20
Used in 95% of trusses
Available in widths: 38 /50 /63 /76 /101 /126 /151 /202 /252
Lengths: 86mm to 1220mm
GN Field Splice Plate
Used to join two timber together on site
Half of the plate is pressed nails
Primary use is for attic truss top hats
Available in widths: 95 /143 /190
GN14
Hot dip galvanised for protection
Used in high load situations
Available in widths : 151 /190 /303
GN80X
Made from high tensile carbon steel
Used for high-load splices to avoid the use of splice blocks
Teeth profile as GN20
Available in widths : 69 /88 /114 /139 / 175 /202 /276
Paslode 3.4 x 35mm Electrogalvanised Square Twist Nail
Cullen products have been tested and CE marked to the requirements of ETAG015 using 3.4 x 35mm square twist nails.
95mm
143mm
190mm
Failure Methods
By shear failure in steel
By axial (tension/ compression) failure in the steel
By nail anchorage failure in the timber
Related Products
Support you can rely on
Expert technical guidance and customer service, from design to site.