Floors
Roofs
Walls
Fixings
PRODUCTS
PSTS
PSTS
Paslode Structural Timber Screw
The Paslode Structural Screws are for use in various applications in timber frame where multiple members are required; typically trimmer joists, multiple floor joists, lintels and multiple girders. Additionally, the 8mm diameter screws can quickly and easily join timber frame panels together.
5 μm
Electro Galv
Up to 2.72kN
Application Dependant
Large diameter flanges under heads ensure very high resistance to pull-through loads
Draws panels tightly together to maximise strength and minimise air leakage
Higher lateral load capacity than nails or conventional screws
No pre–drilling required
Connect up to 4 ply joists and trusses from one side only
Upgraded to improve withdrawal and shear load capabilities, increase speed of installation and to meet the design requirements of Eurocode 5
Quick and easy to install
Lengths:
6.5mm Screw: 35mm, 65mm, 100mm, 115mm, 150mm, 200mm, 250mm
8.5mm Screw: 65mm, 85mm, 100mm, 135mm, 175mm
Open Panel Connection
Regular Point Loads / UDL
Concentrated Point Load
Connecting Multiple Glulam Members With PSTS 8mm Ø
Connecting Solid Timber Members With PSTS 8mm Ø
Guidance
Requires no pre drilling
Refer to Cullen Technical Guide
Upgraded to improve withdrawal and shear load capabilities, increase speed of installation and to meet the design requirements of Eurocode 5.
Large diameter flanges under heads ensure very high resistance to pull–through loads.
Support you can rely on
Expert technical guidance and customer service, from design to site.